若因為某些意外原因（如用戶家里暖氣跑水）導致換熱器循環水路中大量失水時，應采取以下應急措施：

The following emergency measures should be taken when a lot of water loss in the circulation water is caused by some unexpected reasons (such as the user's home heating water):

　　l）迅速關閉主氣閥（換熱機組一段列管式換熱器處的進氣閥），打開疏水器旁通閥，同時停下循環水泵。

1) quickly closed the main gas valve for heat unit a calandria heat exchanger of the intake valve), trap are open bypass valve, stopping the circulating pump.

　　2）組織有關人員迅速查找失水原因，確定熱網中的失水支路，關閉該支路的閥門，并對其余網路迅速恢復供熱。

2) organize relevant personnel to quickly find the reasons for the water loss determined heat loss of the branch, closed the branch of the valve, and to the rest of the network rapid restoration of heating.

　　3）督促準確查找跑水點并及時修復，盡快恢復對該區域的供熱。

3) urge to accurately find the running water point and timely repair, as soon as possible to restore the area of heating.

　　安全運行事項工業生產中，安全永遠是第一位的要素，安全保證不了，生產效益根本無從談起。因此，換熱機組的操作及管理人員必須牢固樹立安全觀念，嚴格遵守安全操作規程。

Safe operation of industrial production, safety is always the first element, the security can not be guaranteed, the production efficiency is simply out of the question. Therefore, the operation and management of the heat exchange（www.hreqi.com） unit must firmly establish the concept of safety, strictly abide by the safety operation procedures.

　　l）熱力站換熱機組操作人員必須經過專業技術培訓及安全教育，熟練掌握熱力站換熱機組的工藝流程以及緊急情況處理措施，掌握投運、停運操作等，須考核合格后持證上崗。

1 thermal power station thermal unit operating personnel must be through professional and technical training, safety education, master thermal station for thermal process and emergency treatment measures, grasp the operation, shut-down operations such as shall be after passing the examination certificates.

　　2）專人操作，一般情況下包含兩套以下換熱器設備的熱力站每班設兩人，包含兩套以上設備的每班應設3人以上。

2) hand operation, under normal circumstances, including two sets of heat transfer equipment in the following two units per class, including more than two sets of equipment per class should be more than 3.

　　建立良好的規章制度，如運行交接班制度、操作規程制度、設備維護保養制度、崗位責任制、技術安全規定等?！?/p>

To establish good rules and regulations, such as the operation of the shift system, the operation of the system, equipment maintenance system, job responsibility system, technical safety regulations, etc..